Mechanical Engineer Unisex Hoodie

Mechanical Engineer Unisex Heavy Blend Hoodie

This hoodie has "Mechanical Engineer"  graphic in both front and back sides with a large front pouch pocket. It also has matched color drawstrings.

It's soft, stylish, fun, and perfect for cool weather.

    Specificatis: 

• 50% pre-shrunk cotton, 50% polyester
• Fabric weight: 8.0 oz/yd² (271.25 g/m²)
• Air-jet spun yarn with a soft feel and reduced pilling
• Double-lined hood with matching drawcord
• Quarter-turned body to avoid crease down the middle
• 1 × 1 athletic rib-knit cuffs and waistband with spandex
• Front pouch pocket
• Double-needle stitched collar, shoulders, armholes, cuffs, and hem

Product measurements

A Length

Place the end of a measuring tape beside the collar at the top of the tee (high point shoulder). Pull the tape to the bottom of the shirt.

B Width

Place the end of a measuring tape at one side of the chest area and pull the tape across to the other side of the product.

C Sleeve length

Place the end of a measuring tape at the center back of the collar, then pull the tape along the top seam of the sleeve. When you get to the shoulder hold the tape in place at the shoulder and continue to pull down the sleeve until you reach the hem of the sleeve.

✔ Pro tip! Measure one of your products at home and compare with the measurements you see in this guide. (5 cm).

✔ Measurements are provided by suppliers. Product measurements may vary by up to 2" 

✔ Care guide: 

Machine wash cold, inside-out, gentle cycle with mild detergent and similar colors. Use non-chlorine bleach, only when necessary. No fabric softeners.

Tumble dry low, or hang-dry for longest life.

Cool iron inside-out if necessary. Do not iron decoration.

Do not dry clean.